DesignJet T525

Formatter Board Failure

This error indicates a problem with the formatter board, which is the main logic board of the printer. It controls all printer functions and communication.

Printhead Not Calibrated

This error indicates that a newly installed printhead has not been calibrated, or a previous calibration failed. This can lead to print quality issues.

Ink System Air Detection

This error indicates that the printer has detected air within the ink delivery system. Air in the ink lines can prevent proper ink flow and cause print quality issues.

Printhead Voltage Error

This error indicates an issue with the voltage supplied to the printheads. Incorrect voltage can damage printheads or prevent them from firing properly.

Ink Cartridge Expired

This error indicates that one or more installed ink cartridges have passed their expiration date. While the printer may allow continued printing, print quality might be affected.

Ink System Valve Failure

This error indicates a problem with one of the ink system valves, which control the flow of ink. A faulty valve can cause ink flow issues or leaks.

Ink System Motor Failure

This error indicates a problem with a motor within the ink delivery system, such as an ink pump motor. This prevents proper ink flow and system operation.

Service Error: Internal Communication Error

This error indicates a general problem with internal communication between the printer's components. This prevents the printer from functioning.

Service Error: EEPROM Configuration Error

This error indicates a problem with the printer's non-volatile memory (EEPROM) where configuration data is stored. This can lead to incorrect settings or boot failures.

Service Error: Component Initialization Failure

This error indicates that a specific internal component failed to initialize during startup. The printer cannot function correctly.

Service Error: Critical System Resource Exhaustion

This error indicates that the printer has run out of critical system resources (e.g., memory, processing power) to perform its tasks. This can lead to crashes.

Carriage Error: Service Station Malfunction

This error indicates a problem with the service station, which cleans and caps the printheads. The carriage cannot move freely or the service station is stuck.

Paper Handling Error: Cutter Malfunction

Vacuum Fan failure