DesignJet 111

System Error: Main PCA Malfunction

This error indicates a problem with the printer's main board (PCA - Printed Circuit Assembly). It's a critical hardware failure that prevents the printer from operating.

Front Panel Failure

Communication lost between front panel and formatter

Formatter Board Failure

Communication lost between front panel and printer

Printhead Missing/Not Installed

This error indicates that a printhead is either missing from its slot or was not properly installed. The printer cannot detect the presence of a printhead.

Ink System Leak Detected

This error indicates that the printer has detected an ink leak within the ink delivery system. This is a critical issue that can damage internal components.

Carriage Error: Carriage System Failure

This is a general critical error indicating a failure within the entire carriage system. The carriage cannot move or operate correctly.

Carriage Error: Encoder Strip Malfunction

Air Pressurization System failure

Paper Handling Error: Take-up Reel Motor Malfunction

This error indicates a problem with the take-up reel motor, which winds printed paper onto a roll. The printer cannot collect printed output.

Hardware Error: Main PCA Fan Malfunction

This error indicates a problem with the cooling fan on the Main PCA. Overheating could occur, leading to performance issues or damage.

Firmware Error: Printer Initialization Failure

Incorrect or unsupported file format (advisory)

Firmware Error: Critical Firmware Error

Generic firmware error